Skip to main content

Livestock Electronics at ADE SoundLab

Daniel from LiveStock Electronics showing me their range of modules
It's always fun to meet new Modular manufacturers, especially when they're from the Netherlands
and/or Belgium.
Last Saturday i had the chance to talk with Daniel Mulder, one of the co-founders of LiveStock Electronics at a special Amsterdam Dance Event SoundLab showcase event.

Livestock Electornics was founded in early 2016 and is about to release their fist modules at the end of this year. Their modules are heavily inspired by the chiptune and DIY-scene, and Daniel showed off a few interesting sounding new modules... you can find all info on their website.

LiveStock Shepard
The SHEPARD is a 4-channel step sequencer specifically designed for live settings.
This module is great for polyphonic and polyrhythmic sequences. And has a lot more to offer than just triggering notes and gates!
The interface is divided into two modes, play and edit mode. In play mode loops of several channels can be selected at the same time, and easily duplicated. While edit mode gives you the possibility to create dynamic sequences for each channel. Gatescan be delayed or held, notes can be pitched, and sequences can be of different lengths, speeds and directions. Each step can also send two control voltages with a optional glide while triggered, this gives you the option to control other modules during a sequence.

The memory has room for 8 tracks with each 16 loops of 64 steps for each of the 4 channels. The loops and tracks can be selected during play mode, or controlled through cv input.
Note: This module is moddable with the Arduino IDE and modding manual (available after release).
LoveStock also supports users in modifying their modules...

LiveStock Bang
BANG is a digital wavetable oscillator in which you can create and share your own wave libraries using the Bang Application, or simply download user wave libraries from our website. Once uploaded to the Bang Module you can use the waveshaping algorithm built into Bang to create new waves using the waves in the library.
LiveStock Electronics Bang Demo video by Paul Tas:

LiveStock Maze
MAZE is a routing and mixing module. Route audio, cv’s or gates to several outputs, determine their intensity and mix them together. Routings can be saved and selected by a knob or by using the cv input.

FELIX is a two 1:3 buffered multiple with attenuators.
Use this module to copy CV’s, Gates or Audio and change the amplitude or intensitywith the attenuators.

MIR and MIR Expander
MIR is a mixer, inverter and VCA. It has four 2:1 mixing VCA's with uninverted and inverted output.
MIR comes along with an expansion module, which gives you the option to change the amount of cv input and whether the VCA responds linear or exponentionally. Place the expansion board anywhere you like, you can also set the parameters on the pcband leave the expansion board out if you need to save some hp.

LiveStock Kepler

KEPLER is a unique low-pass filter with four poles that are individually
controllable with knobs and cv.
The sound can range from soft and clean sounding sweeps to highly resonating self-oscillating sweeps. The cutoff is even controllable with v/oct which means that you could use the filter as an oscillator.

​The LiveStock Electronics crew will tour some more through the Netherlands in the next few weeks with these new modules, so try to check them out at:
28/10 @ Bizarre Sound Creatures (Dutch Design Week) Eindhoven
02/11 @ Nerds on Stage Rotterdam

The Bang and Felix will probably be released in December or January. As for the other modules, the release depends on the next batch of prototype pcbs. If it goes as planned, you can expect them from January to August 2017!

GearSlutz demo video from ADE :

Popular posts from this blog

DIY Modular Case Ideas

There are many ways to house your (eurorack) modular synth, i wrote about the pre-manufactured options from Doepfer earlier, find that post HERE, but of course you can also try to build you own case.
There are many ways to make your own A-100/Eurorack case if you start out with just the basic rails and busboard, and you can make it as cheap or expensive as you can.

Check out a few ideas;
Wooden cabinets and side-panels are still very popular amongst (modular) synth enthusiasts.
These simple case standards for the pre-manufactured LC9 cases are very simple, and can be sooo useful Also check out the other great modular pictures on his site.
Matthew Goike (@Goiks) also has some nice wooden cabinets on display and for sale on his website:

...or do what Stretta did (or rather what his brother did), make a high-end wood/brushed aluminium cabinet with integrated LED-lights and some …

Doepfer A-150-8 Octal Manual/Voltage Controlled Programmable Switches Announced

Doepfer has just released some info on their new modules for NAMM 2017 (19-21 jan.) Besides some vintage editions of existing modules, the A-135ABC VC Performance mixer modules, the A-110-6Trapezoid Thru Zero Quadrature VCO and a new A-100LC1 case (economically priced small housing with 48 HP width) there was also one other interesting new module announcement:
Module A-150-8 contains eight manually/voltage controlled switches.  Each of the eight switches has a manual control button (Man.), a control voltage input (CV), a common Out / Input (O/I), and two In / Outputs (I/O1, I/O2).  The switches are bi-directional, i.e. they can work in both directions, so can connect one input to either of two outputs, or either of two inputs to one output. 
Two LEDs show which in / output is active (ie. which is connected to the common out / input).  In addition the LEDs are used for the programming of the module: For each unit the operating mode can be selected:  Toggle or Level controlled. In Toggl…

Happy New Year From PatchPierre

Hi there, it's me again... Happy New Year!

You might have noticed that I havent posted a lot in the last 2 years...
It's been a rough time for me since the sudden loss of two parents within a relatively short time-span and I really needed some time to get myself together... to set things straight, finding myself and selecting priorities... even my regular work suffered from this breakdown.

It took a while to understand it all, and to get a better grip on it, and it's sometimes still not very clear.
I think I have found a way to cope with most of it now... although the slight autism that I have (ADD-like) doesn't make it easy for, especially in crowds with lots of people I don't know...
On my journey I also (re-)discovered the beautiful woman that has always lived inside of me and that i need to accept and cherish... more on that maybe later... I'm not considering changing the name of the blog to PatchPetra.Net 😇 (...yet), but you might spot me somewhere at mod…